A.G. Peltz Group, LLC placed 25,500 SY of 7”, 10”, and 12” roller compacted concrete for the Alabama Power Companies General Service Complex in Varnons, AL. Phase one of this project was completed in the fall of 2018. AGP is under contract to complete additional phases in 2019 & 2020. […]
AGP mixed and placed over 65,000 cubic yards of 9” & 16” RCC on a new container facility in Rossville, TN. The RCC was placed at 25-30 foot pavement lanes with control joints cut both transverse and longitudinally at 12.5-15 feet. AGP used multiple Aran plants to ensure an interrupted […]
AGP placed approximately 18,750 CY of 9” pavement, 7,853 cy of 12” pavement, and 1,955 cy of 18” pavement on new container transfer facility for the Florida East Coast Railways. The RCC was placed at 25-30 foot pavement lanes with control joints cut both transverse and longitudinally at 12.5-15 feet. […]
AGP placed over 45,000 square yards of 8” RCC Pavement for the USACE in Fort Campbell, KY. The RCC was placed at 25-30 foot pavement lanes with control joints cut both transverse and longitudinally at 12.5-15 feet. AGP partnered with the USACE to review and modernize the existing USACE RCC […]
Project consisted of the paving the base (4″ Aggregate base course) and approximately 35,000 cubic yards of 7″ patented “SPALLESS” Roller Compacted Concrete Paving.
Mixing and placement of 255,000 square yards of 8-inch and 9-inch pavement for a new manufacturing facility. Completion July 2004. see paper: Automakers Drive Acceptance of Roller Compacted Concrete
This project consisted of 20,000 cubic yards of Roller Compacted Concrete. Peltz was the general contractor responsible for all phases of construction including design, mixing, placement and compaction. “This project consistent of placing 9” lifts to create a stair stepped RCC overtopping protection for the Dam.
Design, Mixing and paving of 3600 cubic yards of 7 inch pavement. Project served as demo for the ACPA, Lehigh Cement, and local equipment dealers.
125000 square yards of 7″ RCC pavement for the Honda Logistics Improvements at the Lincoln, AL manufacturing facility. A.G. Peltz Group LLC was responsible for all site paving and base construction on the project. Paving system utilized 4″ of cement treated base which allowed the owner to use completed base […]
First use of RCC on an interstate roadway application in the United States. This project won the 2006 National Partnership for Highway Quality Silver Award and SCAN Innovation Award. The project consisted of over 35 lane miles of shoulder replacement with 6” and 8” RCC. Read More – Rolling Out […]
12750 CY of RCC produced and placed in 9″ lifts using paving equipment. The use of paving equipment allowed the dam to be constructed with a minimum use of formwork, which enhanced the construction schedule. Read More
